SinglemodeFiber Bandpass Filter TheSinglemodeFiber Bandpass Filter is a micro optic device based on environmentally stable thin film filter technology. It is used to block out unwanted noise signals in singlemode fiber communication systems. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and high power handling capability. Specifications Parameter | Unit | Value | PassWavelength Range | nm | 970-990 | Max. Insertion Loss | dB | 0.6 | Typ. Insertion Loss | dB | 0.4 | Blocked Wavelength Range | nm | 1020-1100 | Min. Isolation | dB | 40 | Min. Return Loss | dB | 50 | Max. Polarization Dependent Loss | dB | 0.1 | Thermal Stability | dB/℃ | 0.001 | Max. Input Power | mW | 1000 | Max. Tensile Load | N | 5 | Fiber Type | | HI -1060 fiber,Φ250um | Operating Temperature | ℃ | 0 to +70 | Storage Temperature | ℃ | -40 to +85 |
*Above specifications are measured at low order modes. Package Dimensions Ordering Information SMBP | XX X X | XX | X X | X | X | X | | Wavelength | Fiber core | Handing Power | Connector Type | Fiber Jacket | Fiber Length | 9806=980 Pass/1060 Block SSSS=Specify | 1=6 μm | 3=300mW 5=500mW 10=10W | N=None S=Special | 1=Bare fiber 2=900um loose tube 3=2mm Cable 4=3mm Cable | 1=1m 2=2m S=Specify |
|